1 Surface Treatment Type
2 Geometries and Surfaces to be Masked
If you aren't familiar with the quality of Euromask® products yet, try them before you buy!

Free Sampling: Other Electroplating Treatments (Gold Plating, Silver Plating, Platinum Plating…): Industrial Masking

Masking Methods and Technical Requirements for Products Used in Other Electroplating Treatments

In electroplating treatments such as gold plating, silver plating, and platinum plating (and related processes), the main industrial masking methods include the use of masking plugs, protective caps, tapes and adhesive films, and adhesive dots, depending on the process cycle (pretreatments, baths, rinsing) and the areas to be excluded from deposition.
Plugs and adhesive dots are widely used to close through holes and blind holes, preventing unwanted deposits inside functional seats and reducing rework.
Protective caps and tubes provide external protection for pins, ends, threads, and cylindrical surfaces, keeping mating areas clean and controlling deposit thickness where required.
Electroplating tapes are used to define flat areas, edges, and complex profiles or surfaces that should not be metallized, ensuring sharp edges and repeatable separation between treated and untreated zones.

Select the shape to protect:

Masking methods for simple blind holes | Euromask Free SamplingBlind Holes
Masking methods for simple through-holes | Euromask Free SamplingThrough Holes
Masking methods for pins without a shoulder | Euromask Free SamplingPins without shoulder
Masking methods for pins with a shoulder | Euromask Free SamplingPins with shoulder
Masking methods for flat profiles | Euromask Free SamplingFlat profile
Masking methods for irregular surfaces | Euromask Free SamplingIrregular surface
Masking methods for straight lines | Euromask Free SamplingStraight Lines
Masking methods for curved lines | Euromask Free SamplingCurved Lines
Masking methods for connectors | Euromask Free SamplingConnectors
Hooks for surface treatments | Euromask Free SamplingHooks
Masking methods for grooves | Euromask Free SamplingGrooves

Further Information

Electroplating treatments such as gold plating, silver plating, and platinum plating are electrodeposited metallic coatings that require strict control of areas not to be treated for functional, dimensional, and aesthetic reasons.
During the process, masking for electroplating treatments is essential to protect functional surfaces, threads, holes, sealing seats, contact surfaces, and mating areas, preventing deposits where not intended and ensuring consistent quality of the result.
The masking products for electroplating treatments must ensure stable performance during pretreatment, immersion in electrolyte baths, rinsing, and drying; chemical resistance is an essential requirement to prevent degradation, detachment, infiltration, or bath contamination.
A high level of liquid penetration resistance is also required to keep masked areas protected even during prolonged immersion and handling of the racks.
The conformability and elasticity of the materials facilitate application and removal on threads, edges, and variable geometries, reducing operational time and improving process repeatability.
Another key requirement is clean removal without residues, to avoid aesthetic defects, adhesion issues, or contamination; where applicable, the reusability of plugs and caps contributes to cost optimization, especially in repetitive production runs.
An efficient masking solution is crucial for the reliability and final quality of the surface treatment.
Industrial masking makes it possible to protect threads, holes, functional surfaces, and mating areas.
Masking products for surface treatments include masking plugs, protective caps, adhesive dots, technical adhesive tapes, and masking tubing.
These devices must ensure high resistance to high temperatures.
Dimensional stability is essential during curing and drying cycles.
High chemical resistance to surface pre-treatments, such as degreasing and pickling, is also required.
The elasticity of the materials allows perfect adhesion even on complex geometries.
A key requirement is residue-free removal, in order to preserve the quality of the treatment.
The reusability of masking systems contributes to optimizing production costs.
Industrial surface treatments are essential processes for improving the protection, functionality, and durability of metal components.
Among the main surface treatment processes are powder coating, liquid coating, galvanizing, anodizing, cathodic electrodeposition (e-coating), sandblasting, and flame treatment.
These treatments provide corrosion resistance, electrical insulation, or surface conductivity, depending on the application.
During each industrial treatment, it is essential to define the areas that must not be treated.
Archives
Privacy Policy | Cookie Policy | Terms of use | P.I. 02225080122 | Copyright 2000 2026 Finishing Group S.r.l.
Link a Pyramid Web Agency. Realizzazione Siti, eCommerce, Web Marketing.
100 Occasions pour une réduction
de nos tarifs de 20%!