We can offer 2 Euromask® Solutions

Free Sampling: Pins and Projections without shoulder - Other Electroplating Treatments: Gold Plating, Silver Plating, Platinum Plating, etc. . Masking in industrial surface treatments

Methods and characteristics of masking systems for pins and projections without shoulders

The main masking methods for pins and protrusions without shoulder include masking caps and tubes.
These industrial masking products must ensure high-temperature resistance, chemical inertness, controlled elasticity, and uniform adhesion, even on complex geometries.
Equally important are reusability, dimensional accuracy, and ease of application and removal, to optimize production cycles.

In order to proceed, you may request:
Free Technical Support
Free Sampling

he most suitable solution for your needs may depend on several factors: processing method, volumes, etc...

We can offer 8 Different solutions

Star-shape section stabilized silicone tube for masking
EZT - Hollow star-shape tube 315 °C.
Caps with flange for holes, pins and threads.
CR - Caps with flange 315 °C
Flat caps for holes, pins and threads.
FC - Flat caps 315 °C
Caps with internal rings for protection of pins, holes and threads
VRZC - Vent easy use caps 315°C
Caps with rings for holes, pins and threads protection.
CBI - Caps with rings 315 °C
Easy use caps with ring and flange for holes, pins and threads.
SZC - Easy use caps with ring and flange 315 °C
Caps for holes, pins and threads protection. Rounded head.
EC - Standard masking caps 315 °C
Round section stabilized silicone tube for masking
EST - Rounded section tube 315 °C.

Further Information

The masking of pins and protrusions without shoulder is a critical phase in industrial surface treatment processes such as industrial painting, cataphoresis, anodizing, galvanizing, and sandblasting. Effective protection ensures the preservation of dimensional tolerances, threads, and functional surfaces, preventing rework and scrap.
In electroplating treatments such as gold plating, silver plating, and platinum plating (and related processes), the main industrial masking methods include the use of masking plugs, protective caps, tapes and adhesive films, and adhesive dots, depending on the process cycle (pretreatments, baths, rinsing) and the areas to be excluded from deposition.
Plugs and adhesive dots are widely used to close through holes and blind holes, preventing unwanted deposits inside functional seats and reducing rework.
Protective caps and tubes provide external protection for pins, ends, threads, and cylindrical surfaces, keeping mating areas clean and controlling deposit thickness where required.
Electroplating tapes are used to define flat areas, edges, and complex profiles or surfaces that should not be metallized, ensuring sharp edges and repeatable separation between treated and untreated zones.
Electroplating treatments such as gold plating, silver plating, and platinum plating are electrodeposited metallic coatings that require strict control of areas not to be treated for functional, dimensional, and aesthetic reasons.
During the process, masking for electroplating treatments is essential to protect functional surfaces, threads, holes, sealing seats, contact surfaces, and mating areas, preventing deposits where not intended and ensuring consistent quality of the result.
The masking products for electroplating treatments must ensure stable performance during pretreatment, immersion in electrolyte baths, rinsing, and drying; chemical resistance is an essential requirement to prevent degradation, detachment, infiltration, or bath contamination.
A high level of liquid penetration resistance is also required to keep masked areas protected even during prolonged immersion and handling of the racks.
The conformability and elasticity of the materials facilitate application and removal on threads, edges, and variable geometries, reducing operational time and improving process repeatability.
Another key requirement is clean removal without residues, to avoid aesthetic defects, adhesion issues, or contamination; where applicable, the reusability of plugs and caps contributes to cost optimization, especially in repetitive production runs.
An efficient masking solution is crucial for the reliability and final quality of the surface treatment.
Industrial masking makes it possible to protect threads, holes, functional surfaces, and mating areas.
Masking products for surface treatments include masking plugs, protective caps, adhesive dots, technical adhesive tapes, and masking tubing.
These devices must ensure high resistance to high temperatures.
Dimensional stability is essential during curing and drying cycles.
High chemical resistance to surface pre-treatments, such as degreasing and pickling, is also required.
The elasticity of the materials allows perfect adhesion even on complex geometries.
A key requirement is residue-free removal, in order to preserve the quality of the treatment.
The reusability of masking systems contributes to optimizing production costs.
Industrial surface treatments are essential processes for improving the protection, functionality, and durability of metal components.
Among the main surface treatment processes are powder coating, liquid coating, galvanizing, anodizing, cathodic electrodeposition (e-coating), sandblasting, and flame treatment.
These treatments provide corrosion resistance, electrical insulation, or surface conductivity, depending on the application.
During each industrial treatment, it is essential to define the areas that must not be treated.
Archives
Privacy Policy | Cookie Policy | Terms of use | P.I. 02225080122 | Copyright 2000 2026 Finishing Group S.r.l.
Link a Pyramid Web Agency. Realizzazione Siti, eCommerce, Web Marketing.
100 Occasions pour une réduction
de nos tarifs de 20%!