We can offer 10 Euromask® Solutions

Free Sampling: Straight lines - Powder Coating . Masking in industrial surface treatments

Methods and characteristics of masking systems for straight lines

The main masking method for straight lines involves the use of masking tapes, selected according to the treatment; the goal is to achieve a clean and consistent separation edge between the treated area and the protected area, maintaining a smooth line along the entire length without interruptions or “steps.” These industrial masking tapes must ensure uniform adhesion and edge sealing, reducing the risk of paint or treatment seepage.
Equally important are high-temperature resistance and chemical inertness depending on the process (e.g., painting, cathodic electrophoretic coating, anodizing, galvanizing, sandblasting), as well as clean removal that leaves no residue and does not damage the coating.
To optimize production cycles, ease of application (quick placement and linear tracing), process stability, and precision in maintaining the edge without shifting during handling or thermal cycles are critical.

In order to proceed, you may request:
Free Technical Support
Free Sampling

he most suitable solution for your needs may depend on several factors: processing method, volumes, etc...

We can offer 10 Different solutions

Fiber-glass cloth adhesive tape
EGC - White tape for masking 260 °C
Polyester Tape 0.05 (Silicone-Free)
RPT - Green tape 190°C
PET (polyester) tape ultra-thin
STC - PET clear masking tape 204 °C
Paper tape
SPG - White paper masking tape 190°
PET tape (polyester)
EPR - Red tape for masking 220 °C
PET tape (polyester)
CLT - Clear tape for masking 204 °C
PET tape (polyester)
EPB - Blue tape for masking 204 °C
Polyimide tape
PC - Yellow Polyimide masking tape 260 °C.
0.05 Polyester Tape
EPTXL - 204°C Green Tape
PET green tape
HPT - Masking green tape 204 °C

Further Information

The straight line masking is a critical phase in industrial surface treatment processes such as industrial painting, cataphoresis, anodizing, galvanizing, and sandblasting. If the tape is inadequate or improperly applied, runs, jagged edges, or infiltrations can occur, impacting aesthetics and functionality. The use of properly sized masking tapes compatible with the process ensures clean and repeatable lines, reducing rework and scrap when the line defines visible areas or technical zones that must remain protected.
In powder coating, the main industrial masking methods include the use of masking plugs, adhesive dots, protective caps, and high-temperature tapes.
Silicone plugs and adhesive dots are widely used to close through holes and blind holes.
Silicone caps and tubes provide external protection for pins, ends, and cylindrical surfaces.
Powder coating tapes are used to define flat areas or complex profiles.
Powder coating is an industrial surface treatment that requires precise control of areas not to be coated.
During the process, masking for powder coating is essential to protect functional surfaces, threads, holes, and mating areas.
Masking products for powder coating must withstand the high curing temperatures without degrading; thermal resistance is an essential characteristic to ensure dimensional stability during the oven cycle.
High material elasticity is also required to facilitate application and removal.
The reusability of masking devices contributes to optimizing production costs.
Another key requirement is chemical resistance to surface pretreatments; proper adhesion without residues prevents contamination of the final coating.
An efficient masking solution is crucial for the reliability and final quality of the surface treatment.
Industrial masking makes it possible to protect threads, holes, functional surfaces, and mating areas.
Masking products for surface treatments include masking plugs, protective caps, adhesive dots, technical adhesive tapes, and masking tubing.
These devices must ensure high resistance to high temperatures.
Dimensional stability is essential during curing and drying cycles.
High chemical resistance to surface pre-treatments, such as degreasing and pickling, is also required.
The elasticity of the materials allows perfect adhesion even on complex geometries.
A key requirement is residue-free removal, in order to preserve the quality of the treatment.
The reusability of masking systems contributes to optimizing production costs.
Industrial surface treatments are essential processes for improving the protection, functionality, and durability of metal components.
Among the main surface treatment processes are powder coating, liquid coating, galvanizing, anodizing, cathodic electrodeposition (e-coating), sandblasting, and flame treatment.
These treatments provide corrosion resistance, electrical insulation, or surface conductivity, depending on the application.
During each industrial treatment, it is essential to define the areas that must not be treated.
Archives
Privacy Policy | Cookie Policy | Terms of use | P.I. 02225080122 | Copyright 2000 2026 Finishing Group S.r.l.
Link a Pyramid Web Agency. Realizzazione Siti, eCommerce, Web Marketing.
100 Occasions pour une réduction
de nos tarifs de 20%!